Mobilgard? 560 VS
美孚佳特?560 vs
柴油機氣缸油
產品描述
美孚佳特?560比?？松梨谑且粋€高性能的船用柴油機氣缸油，設計用于在十字頭機從0.5-4%運行與硫含量重質燃料。這個新的氣缸潤滑技術在較高的操作溫度和壓力，在今天的現代十字頭引擎提供最大限度的保護膠和腐蝕磨損。Mobilgard 560與優異的性能已在最高峰值點火壓力和襯墊溫度顯示。
Mobilgard? 560 VS
Diesel Engine Cylinder Oil
Product Description
Mobilgard? 560 VS by ExxonMobil is a high performance, marine diesel engine cylinder oil designed for use in crosshead engines running heavy fuel with sulfur levels from 0.5-4%. This new cylinder lubricant technology provides maximum protection from adhesive and corrosive wear at the higher operating temperatures and pressures found in today's modern crosshead engines. The outstanding performance of Mobilgard 560 VS has been demonstrated at the highest peak firing pressures and liner temperatures.
Mobilgard 560 VS employs additives with greater thermal stability and acid-corrosion protection. It has an optimum viscosity of 20 cSt @ 100oC and low volatility for optimal lubricant distribution and film retention. Through the use of patented technology, the oil’s higher viscosity is attained without the use of thermally unstable, deposit-producing bright stock. Unique additive technology at the 60 TBN alkalinity level in Mobilgard 560 VS has demonstrated outstanding ring and liner protection and cleanliness under sustained operation with fuel sulphur levels below 1%.
Features and Benefits
Mobilgard 560 VS cylinder oil offers the following features and potential benefits:
|
Features
|
Advantages and Potential Benefits
|
|
Excellent thermal and oxidation stability
|
Helps reduce deposits and sludge formation
Clean engines reduce the lay-up time required for overhauls
|
|
Exceptional antiwear properties
|
Reduced liner and ring wear helps promote extended periods between overhauls
Excellent anti-scuffing control
|
|
Outstanding detergency capability
|
Excellent engine cleanliness increases combustion efficiency
Helps miminise deposit formation with use of low sulfur (<1%) fuels
|
|
High TBN level and retention
|
Effectively handles wide fuel sulfur range from 0.5-4.0% at 70 BN equivalent feed rates
Helps to maximize protection against the corrosive effects of high sulphur fuels
|
Applications
Mobilgard 560 VS has been developed for marine crosshead engines designed for increased power and fuel efficiency. Mobilgard 560 VS has also demonstrated excellent performance in earlier engine designs and during slow speed steaming operation.
Specifications and Approvals
|
|
|
|
MAN Diesel
|
X
|
|
Wartsila
|
X
|
|
Mitsubishi
|
X
|
** Please refer to latest service bulletins from MAN Diesel & Turbo and Wartsila Switzerland for lubrication requirements. At the date of print these are MDT: SL2013-571 and Wartsila: RT-148, Issue 1, 2 July 2013
To ensure achieving the maximum equipment life possible as well as appropriate feedrates, particular attention should be paid to the manufacturer's special recommendations as published in the references as above or any other future manufacturer’s instructions
Typical Properties
|
SAE Grade
|
50
|
|
Specific Gravity at 15oC
|
0.922
|
|
Flash Point, oC, ASTM D 92
|
248
|
|
Pour Point, oC, ASTM D 97
|
-20
|
|
cSt, at 40oC
|
219
|
|
cSt, at 100oC
|
20
|
|
Viscosity Index, ASTM D 2270
|
105
|
|
TBN, mg KOH/g, ASTM D 2896
|
60
|
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application, following the recommendations provided in the Material Safety Data Sheet (MSDS). MSDSs are available upon request through your sales contract office. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
6-2014
Copyright © 2001-2016 Exxon Mobil Corporation. All rights reserved.
 |
