Mobil DTE 10 Excel系列抗磨液壓油

產品名稱           ISO粘度等級

美孚DTE 10超凡15   15

美孚DTE 10超凡15   22

美孚DTE 10超凡32   32       

美孚DTE 10超凡46   46

美孚DTE 10超凡68   68

美孚DTE 10超凡100  100

美孚DTE 10超凡150  150

美孚DTE 10超凡(Mobil DTE 10 Excel)系列是高性能抗磨液壓油，旨在滿足現代化、高壓、工業和移

動式設備液壓系統的要求。美孚DTE 10超凡的專利申請中配方采用精心選擇的基礎油調以專有添加劑，具

有適合各種應用的均衡性能。本產品具有出色的氧化安定性和熱安定性，可延長油品壽命，并減少在嚴苛

條件下采用高壓高輸出泵的液壓系統中形成沉淀物。創新型清潔性能可保護重要液壓系統組件避免故障，

例如許多現代化液壓系統中常見的緊公差伺服閥和比例閥。高剪切穩定性粘度指數允許寬工作溫度范圍，

并保持液壓效率和低高溫時組件保護。出色的空氣釋放性能為采用低停留時間的系統中提供附加的保護措

施。這有助于防止氣蝕和微自燃現象。非鋅抗磨系統可在齒輪泵、葉片泵和活塞泵中提供高度保護等級，

同時降低沉淀物形成。

Mobil DTE 10 Excel? Series

Premium Quality Hydraulic Oils

Product Description

Mobil DTE 10 Excel? Series are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems.
The Mobil DTE 10 Excel Series is constructed from selected base oils and a proprietary additive system to provide well balanced performance in a range of applications.  The products exhibit outstanding oxidation and thermal stability allowing long oil life and minimized deposit formation in severe hydraulic systems using high pressure, high output pumps.  The innovative ultra keep clean performance protects critical hydraulic system components from malfunction, such as tight tolerance servo and proportional valves found in many modern hydraulic systems.  The shear stable, high viscosity index allows for a wide operating temperature range maintaining maximum hydraulic efficiency and component protection at both low and high temperatures.  Outstanding air release properties provide an added measure of protection in systems with low residence time helping to prevent cavitation damage and micro dieseling.  The carefully selected base oil and additives allow passing results of acute aquatic toxicity testing (LC-50, OECD 203) and the zinc free anti-wear system provides a high degree of protection in gear, vane and piston pumps while also minimizing deposit formation.
Formulated with extensive laboratory and in-service field testing, the Mobil DTE 10 Excel series can help provide quantifiable increases in hydraulic efficiency compared to other Mobil? hydraulic oils.  This can translate to reduced power consumption or increased machine output, resulting in monetary savings. 
In controlled laboratory efficiency testing, Mobil DTE 10 Excel was measured to provide up to a six percent improvement in hydraulic pump efficiency compared to Mobil DTE 20 when operating in standard hydraulic applications.
In additional laboratory and in-service field demonstrations conducted on a wide range of modern hydraulic systems, the Mobil DTE 10 Excel series demonstrated, compared to Mobil conventional hydraulic fluids, exceptional oil life, outlasting these fluids by up to three times, while maintaining outstanding hydraulic system cleanliness and component protection.  Mobil DTE 10 Excel also demonstrated the value of its high viscosity index and outstanding shear stability by operating successfully in temperatures as low as -34°C and by maintaining ISO viscosity grade.
Mobil DTE 10 Excel has also been tested in standard vane pumps under controlled conditions directly against competitive products.  At the end of the 30 minute test, Mobil DTE 10 Excel resulted in less system heat generation and the system temperatures were measured to be 6°C-7°C less than certain competitive products run under identical conditions.

The energy efficiency of Mobil DTE 10 Excel relates solely to the fluid performance when compared to conventional Mobil-branded  hydraulic fluids. The technology used allows up to 6% increase in hydraulic pump efficiency compared to Mobil DTE 20 series when tested in standard hydraulic applications under controlled conditions. The energy efficiency claim for this product is based on test results on the use of the fluid conducted in accordance with all applicable industry standards and protocols.

Features and Benefits

The Mobil DTE 10 Excel Series hydraulic oils provide outstanding hydraulic system efficiency; ultra keep clean performance, and a high degree of fluid durability. The hydraulic efficiency feature can lead to reduced energy consumption for both industrial and mobile equipment, reducing operating costs and improving productivity. Their excellent oxidation and thermal stability can help to extend oil and filter change intervals while helping to ensure clean systems. Their high level of anti-wear properties and excellent film strength characteristics result in a high degree of equipment protection that not only results in fewer breakdowns but helps improve production capacity.

Applications

• Industrial and mobile equipment hydraulic systems operating at high pressures and temperatures in critical applications
• Hydraulic systems subject to deposit build-up such as sophisticated Computer Numerically Controlled (CNC) machines, particularly where close clearance servo-valves are used
• Systems where cold start-up and high operating temperatures are typical
• Systems requiring a high degree of load-carrying capability and anti-wear protection

• Machines employing a wide range of components using various metallurgy

Specifications and Approvals

Typical Properties