Mobil Extra Hecla Super Cylinder Oil Mineral美孚超級汽缸油
美孚汽缸油
齒輪和汽缸油
產品描述
美孚氣缸油是高性能高粘度油，專為在封閉的蝸輪工作在溫和的高速度和溫度，并在重負荷，低速或高溫要求高粘度油。他們也打算在蒸汽發動機氣缸應用。它們是由高質量的基礎庫存，是耐氧化和熱降解，并建立了由蒸汽缸的高工作溫度引起的有害存款。他們防止生銹和腐蝕，提供良好的油膜強度和優良的潤滑性和抗水沖洗它們。
美孚?600W汽缸油600W?超級汽缸油，美孚和美孚?特級克力汽缸油additized增強摩擦及承載性能。產品族的四個成員被廣泛應用于蝸輪蝸桿的應用，聯軸器和軸承，與粘度等級取決于操作條件。在蒸汽應用美孚600W汽缸油推薦用于飽和和過熱蒸汽溫度達260oC.美孚特級克力汽缸油和美孚特級克力汽缸油礦物可用于過熱蒸汽260以上oC.美孚特級克力汽缸油礦物具有良好的抗乳化性。美孚氣缸油可以應用于滴灌飼料杯和力飼料機械潤滑裝置。
Mobil Cylinder Oils
Gear and Cylinder Oils
Product Description
Mobil Cylinder oils are high performance high viscosity oils designed for use in enclosed worm gears operating at moderate to high speeds and temperatures, and where heavy loads, slow speeds or high temperatures demand high viscosity oils. They are also intended for use in steam engine cylinder applications. They are formulated from high quality base stocks that are resistant to oxidation and thermal degradation, and the build-up of harmful deposits caused by the high operating temperatures of steam cylinders. They protect against rust and corrosion and provide good film strength and excellent lubricity and they are resistant to water washout.
Mobil 600W? Cylinder Oil, Mobil 600W? Super Cylinder Oil and Mobil? Extra Hecla Super Cylinder Oil are additized to enhance their frictional and load-carrying properties. All four members of the product family are widely used in worm gear applications, couplings and bearings, with viscosity grade depending on operating conditions. In steam applications Mobil 600W Super Cylinder Oil is recommended for saturated and superheated steam up to a temperature of 260oC. Mobil Extra Hecla Super Cylinder Oil and Mobil Extra Hecla Super Cylinder Oil Mineral may be used with superheated steam above 260oC. Mobil Extra Hecla Super Cylinder Oil Mineral has good demulsibility. Mobil Cylinder Oils can be applied both by drip feed cups and force feed mechanical lubricating devices.
Features and Benefits
Mobil Cylinder Oils offer the following features and potential benefits:
|
Features
|
Advantages and Potential Benefits
|
|
Excellent film integrity at high temperatures
|
Excellent equipment protection at high temperatures occasioned by variable load conditions, avoiding unexpected downtime and equipment replacement
|
|
|
Provision of good sealing film round rods and in glands in steam applications
|
|
Excellent resistance to deposit formation at high temperatures
|
Resistant to deposits on areas subject to high spot temperatures, maintaining cleaner systems, requiring less maintenance
|
|
Excellent anti-wear and low friction properties
|
Additized grades give reduced wear
|
|
Very good water separation in absence of additives
|
Non-additized grade gives ready separation from condensate
|
|
High quality and built in performance features
|
Results in fewer unplanned stoppages and reduced maintenance costs
|
Applications
Mobil 600W Cylinder Oil is recommended for the following applications:
-
The splash lubrication of enclosed worm gears operating at moderate to high speeds and temperatures. (Mobil 600 W Cylinder Oil)
-
Steam cylinders, couplings, bearings, and break-in of compressor cylinders (Mobil 600 W Cylinder Oil)
-
Mobil 600W Super Cylinder Oil and Mobil Extra Hecla Super Cylinder Oil are recommended for the above applications but under higher temperature and load conditions
-
Mobil Extra Hecla Super Cylinder Mineral is recommended where ready separation from condensate is essential, for example, where exhaust steam is used for process work
-
Mobil Extra Hecla Super Cylinder Mineral may also be used as a tempering oil for bath temperatures up to 290oC
Typical Properties
|
Mobil Cylinder Oils
|
Mobil 600 W Cylinder Oil
|
Mobil 600 W Super Cylinder Oil
|
Mobil Extra Hecla Super Cylinder Oil
|
Mobil Extra Hecla Super Cylinder Oil Mineral
|
|
ISO Viscosity Grade
|
--
|
460
|
680
|
1000
|
|
Viscosity, ASTM D 445
|
|
|
|
|
|
cSt @ 40oC
|
375
|
460
|
680
|
1000
|
|
cSt @ 100oC
|
28.0
|
30.5
|
35.8
|
42.0
|
|
Viscosity Index, ASTM D 2270
|
95
|
95
|
85
|
80
|
|
Pour Point, oC, ASTM D 97
|
-9
|
-6
|
0
|
3
|
|
Flash Point, oC, ASTM D 92
|
282
|
282
|
282
|
288
|
|
Density,ASTM D4052 @15.6oC kg/l,
|
0.90
|
0.91
|
0.92
|
0.92
|
|
Copper Strip Corrosion, ASTM D 130,3 hrs @ 100o C
|
1B
|
1B
|
1B
|
1B
|
 |
