| 聯系我們 |
 |
深圳市華機貿易有限公司
地址：深圳市龍華區和平工業園E棟1樓
電話：0755-23779473
傳真：0755-23779473
聯系人：何先生
手機：15012605830
網址：http://www.asteelflash.com.cn
郵箱：31690073@qq.com
|
|
|
|
| 產品展示 >> SHELL GADUS S5 V42P 2.5/Shell Nerita HV |
|
SHELL GADUS S5 V42P 2.5/Shell Nerita HV詳細說明 （瀏覽1877次）
SHELL GADUS S5 V42P 2.5
Shell Gadus S5 V42P ? Extra Protection & Long Life
? High Speed
? Lithium
Advanced Extreme Pressure Grease for
High Speed Bearings
Customer Benefits
Cost Savings via
? Lower seal costs that result from the use of advanced XHVI base oils instead of PAOs and/or
esters that are more compatible with seal materials allowing lower cost seals to be used while
obtaining the same extended life.
? Lower maintenance costs due to the extra long service life that can be obtained in electrical
motors & high speed bearings that result from the use of an appropriate thickener and selected
additive technology, developed & tested by Shell
? Reduced cost due to the excellent performance in high speed machine tool bearings that usually
employ far more expensive greases from specialist companies (eg Kluber Staburags), this
performance results from the leading edge technology that comes from investing continuously in
Grease R&D
Peace of Mind via
? The proven nature of the technology, that is evident from the approval by leading companies such
as SNR, ABB, in a range of applications which grows every year.
? The knowledge that Shell is in FULL control from Research & Development to manufacture &
quality assurance in our own ISO approved plants, which are regularly audited and passed by
quality conscious customers buying Shell Gadus S5 V42P.
? Availability of Shell expertise, to assist in safely developing the cost savings available from the
wide range of Shell products
? No Health & Safety concerns, as Shell Shell Gadus S5 V42P is free from any harmful component
vs EC requirements.
Convenience via
? Guaranteed suitable lubrication of equipment world-wide, as this product is part of the
International SeaShell range of products, which can be found throughout the world, and is
actually used for electrical motor bearings in Shell oil rigs and refineries world-wide.
Key Industry Sectors & Applications
z General Engineering, Autocomponents
Electrical motors, high speed bearings (loaded & unloaded), high speed machine tool bearings, bearings of
industrial fans, wheel bearings,.. with a n.Dm factor above 250,000. Operating Temperature Range
Shell Gadus S5 V42P is recommended for use over the temperature range -30°C to 130°C
Health & Safety
Shell Gadus S5 V42P is unlikely to present any significant health or safety hazard when properly used in
the recommended application, and good standards of industrial and personal hygiene are maintained. For
further guidance on Product Health & Safety refer to the appropriate Shell Material Safety Data Sheet
Advice
For advice on applications not covered in this leaflet may be obtained from your Shell Representative
Typical Physical Characteristics
Shell Gadus Grease S5 V42P
NLGI Consistency 2.5
Colour Light brown
Soap Type Lithium
Base Oil (type) Special Mineral
(synthetic like)
Kinematic Viscosity
@ 40°C cSt
100°C cSt
(IP 71/ASTM-D445)
42
8
Dropping Point °C
(IP 322/ASTM-D566-76)
180
Cone Penetration
Unworked @ 25°C 0.1 mm
(IP 50/ASTM-D217)
255
These characteristics are typical of current production. Whilst future production will conform to Shell's
specification variations in these characteristics may occur.
 |
|
|
