Obeen UF 0 Aluminium-Komplex PAO 0 515 -40 +140 EP/AW/
FSS
Obeen UF 1 Aluminium-Komplex PAO 1 580 -30 +140 EP/AW/
Korrosionsschutz
Obeen UF 2 Aluminium-Komplex PAO 2 543 -30 +140 EP/AW/
Korrosionsschutz
Obeen UF 3 Aluminium-Komplex PAO 3 477 -30 +140 EP/AW/
Korrosionsschutz
Castrol Obeen UF Range
Food Grade Grease
Description
Castrol Obeen? UF - are light, natural-colored special greases. They are physiologically safe and contain only
components which are listed in the U.S. Code of Federal Regulations, Title 21, Section 178.3570.
Castrol Obeen UF greases are especially suited for use in the food, beverage and pharmaceutical industries. Castrol
Obeen UF Series Greases are acceptable to the USDA as lubricants where incidental food contact may occur.
Application
Castrol Obeen UF is especially suited for the use in the food and beverage industries as well as in the pharmaceutical
industry where there may be exposure of the lubricated part to the edible product or its packaging. CastrolObeen UF 000
for central lubrication systems - filling plants of yoghurt, instant food and cheese processing machines (e.g. turning
machines). Obeen UF 00 and 0 for grease-lubricated gears and gear motors - central lubrication systems such as in
filling plants, packaging stations and cardboard folding machines.
Obeen UF 1, 2 and 3 as tap, sealing and bearing grease, for long term lubrication of rolling and sliding bearings, for fillers,
bottle washing machines, labelling machines, closing machines, filling machines, conches, cyclones. Obeen UF 2
guarantees mobility of taps. Obeen UF 3 withstands steam cleaning and is especially suited for the beverage industry
where pipes are cleaned or sterilised with steam and is available in aerosol cans.
USDA H1 / NSF Approved certificate no. 134140.
Advantages
OPTITEC? - Castrol technology.
Physiologically safe.
Odorless, tasteless and colorless.
Resistant to hot and cold water.
Does not affect foam on beer.
Excellent conveying ability.
Good anti-corrosion properties.
e Method Units UF 000 UF 00 UF 0 UF 1 UF 2 UF 3
Consistency
/ NLGI
Grade
DIN
51818
- 000 00 0 1 2 3
Worked
Penetration
DIN
ISO
2137
0.1
mm
460 420 370 320 280 240
Dropping
Point
DIN
51807
T.1
°C /
°F
170 / 388 195 / 381.2 215 / 419 225 / 437 230 / 446 235 / 455
Water
Resistance
at 90°C /
194F
DIN
51802
- 0 0 0 0 0 0
Corrosion
Protection
(SKF
Emcor)
DIN
51802
- 0/1 0/1 0/1 0/1 0/1 0/1
Copper
Corrosion
Protection at
100°C /
212°F
DIN
51811
- 1b 1b 1b 1b 1b 1b
These technical data are based on average test results. Minor deviations may occur from case to case.
 |
