美孚車用齒輪油?XFD 50，60
高性能傳動系統潤滑油
產品描述
美孚車用齒輪油?XFD 50和60是高性能傳動系統潤滑油，專為提供最佳的組件壽命作為卡特彼勒終傳動和車軸推薦。他們是從先進的基礎油配方和最新的添加劑技術，以保護軸承和齒輪過早失效，由于疲勞。這些潤滑劑提供優良的性能在重型商用車軸和最終驅動器的極端壓力和沖擊負荷預計。他們提供了特殊的化學和熱穩定性，在高的散裝油溫度下產生的重負載和/或高的環境溫度。
美孚車用齒輪油XFD系列已被廣泛的測試在卡特彼勒非公路重型卡車和推土機在很寬范圍的環境溫度和在惡劣條件下使用推薦的換油間隔長達4000個小時的非公路運輸經營領域。
特點和優點
要求更高的生產力，更嚴重的工作條件，和更大的容量設備把嚴重的壓力在車軸和最終驅動組件。在嚴重的應用- 4潤滑油可能是有限的，在磨損保護在重倉最終由于他們需要同時服務于重型變速箱離合器摩擦的要求。最佳的耐久性和性能，美孚車用齒輪油XFD齒輪潤滑劑可以依靠保持生產率和減少極端應用預定服務間隔之間的維護成本。關鍵的好處包括：
功能優勢和潛在的好處
改進的極壓（EP）性能與- 4流體增加載荷和沖擊承載能力降低過早失效和經營成本
高氧化和熱穩定性更長的石油壽命，減少存款，延長元件壽命
良好的保護，防止銅腐蝕和生銹延長組件壽命和更低的維護成本
寬的溫度能力，簡化了庫存，減少了對季節性變化的需要
良好的兼容性與密封和傳統的驅動火車潤滑油減少泄漏和污染從外部來源
消除或減少發泡保持可靠的磨損保護膜強度
應用
重型車橋和終傳動用于卡車和推土機由卡特彼勒建造
非公路行業包括：建筑、采礦、采石
采用美孚車用齒輪油XFD 50時最高工作環境溫度低于32oC（90oF）
采用美孚車用齒輪油XFD 60時最高工作環境溫度低于50oC（122oF）
不推薦用于發動機、變速器或液壓系統
不推薦用于含有摩擦材料和/或濕式制動器的最終驅動器和車軸
Mobilube? XFD 50, 60
High Performance Drivetrain Lubricants
Product Description
Mobilube? XFD 50 and 60 are high performance drivetrain lubricants engineered specifically to provide optimum component life when used as recommended in Caterpillar final drives and axles. They are formulated from advanced base oils and the latest additive technology to protect bearings and gears from premature failure due to fatigue. These lubricants deliver excellent performance in heavy-duty commercial axles and final drives where extreme pressures and shock loading are expected. They provide exceptional chemical and thermal stability at elevated bulk oil temperatures generated under heavy loads and/or high ambient temperatures.
Mobilube XFD Series have been extensively field tested in Caterpillar off-highway heavy trucks and bulldozers over a wide range of ambient temperatures and operating in severe conditions with a recommended drain interval up to 4,000 hours for off-highway haulers.
Features and Benefits
Demands for higher productivity, more severe operating conditions, and larger capacity equipment put severe stress on axles and final drive components. In severe applications, TO-4 lubricants may be limited in terms of wear protection in heavily loaded final drives due to their need to also serve the frictional requirements of clutches in heavy-duty transmissions. For optimum durability and performance, Mobilube XFD gear lubricants can be relied on to maintain productivity and minimize maintenance costs between scheduled service intervals in extreme applications. The key benefits include:
|
Features
|
Advantages and Potential Benefits
|
|
Improved extreme pressure (EP) performance versus TO-4 fluids
|
Increased load and shock carrying ability with reduced premature failures and operating costs
|
|
High oxidation and thermal stability
|
Longer oil life, reduced deposits, and extended component life
|
|
Excellent protection against copper corrosion and rust
|
Extended component life and lower maintenance costs
|
|
Wide temperature capability
|
Simplifies inventory and reduces need for seasonal change-outs
|
|
Good compatibility with seals and conventional drive train lubricants
|
Reduces leakage and contamination from external sources
|
|
Eliminates or reduces foaming
|
Maintains film strength for reliable wear protection
|
Applications
-
Heavy-duty axles and final drives used in trucks and bulldozers built by Caterpillar
-
Off-highway industries including: construction, mining, and quarrying
-
Use Mobilube XFD 50 when the maximum operating ambient temperature is below 32oC (90oF)
-
Use Mobilube XFD 60 when the maximum operating ambient temperature is below 50oC (122oF)
-
Not recommended for engines, transmissions or hydraulic systems
-
Not recommended for final drives and axles containing friction material and/or wet brakes
Specifications and Approvals
|
Mobilube XFD meets the following industry and builder specifications:
|
50
|
60
|
|
Caterpillar FD-1
|
X
|
X
|
Typical Properties
|
Mobilube XFD
|
50
|
60
|
|
SAE Grade
|
50
|
60
|
|
Viscosity, ASTM D 445
|
|
|
|
cSt @ 40oC
|
206
|
334
|
|
cSt @ 100oC
|
18.5
|
25.6
|
|
Viscosity Index, ASTM D 2270
|
99
|
100
|
|
Pour Point, oC, ASTM D 97
|
-21
|
-15
|
|
Flash Point, oC, ASTM D 92
|
250
|
255
|
|
Density @ 15oC kg/l, ASTM D 4052
|
0.890
|
0.895
|
Precautions
The products described on this data sheet are manufactured from high quality petroleum base stocks, carefully blended with selected additives. As with all petroleum products, good personal hygiene and careful handling should always be practiced. Avoid prolonged contact to skin, splashing into the eyes, ingestion or vapour inhalation. Please refer to the Material Safety Data Sheet for further information.
Note: The products described on this data sheet are NOT controlled under Canadian WHMIS legislation.
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
1-2013
Copyright © 2001-2016 Exxon Mobil Corporation. All rights reserved.
 |
